SNMP::Info - Device Compatibility Matrix
Device Vendors
[Airespace] [Alcatel-Lucent] [Allied Telesis] [Alteon] [Altiga] [APC] [Arista] [Aruba] [Asante] [Avaya] [Bay] [Bluecoat] [Brocade] [Cisco] [Citrix] [Cyclades] [Dell] [Enterasys Networks] [Extreme Networks] [Foundry Networks] [FreeBSD] [HP] [Juniper] [Kentrox] [Lantronix] [Linksys] [Microsoft] [Mikrotik] [Neoteris] [Net-SNMP] [NetGear] [NetScreen] [Nortel] [PacketFront] [Proxim] [Radware] [SonicWALL] [Sun] [Synoptics] [Trapeze] [Zyxel]Airespace
- Airespace Wireless Controllers Family
- Uses proprietary MIBs to provide MAC to port mapping. APs appear as switch ports.
- Arpnip is emulated by gathering the MAC to IP mappings from controller snooping.
- Device will only communicate with SNMP version configured in the controller.
- All
arpnip class duplex macsuck modules portmac topo ver vlan yes Layer2::Airespace both yes yes yes no - yes
- AOS Family
- All
arpnip class duplex macsuck modules portmac topo ver vlan - Layer3::Aruba - - - - - - -
- L3 Family
- All
arpnip class duplex macsuck modules portmac topo ver vlan - Layer3::AlcatelLucent - - - - - - -
- Timetra Family
- All
arpnip class duplex macsuck modules portmac topo ver vlan - Layer3::Timetra - - - - - - -
- Allied Hubs Family
- AT-3624T
arpnip class duplex macsuck modules portmac topo ver vlan no Layer1::Allied no no - - no 1 -
- AT-8000 Switches Family
- All
arpnip class duplex macsuck modules portmac topo ver vlan no Layer2::Allied no yes - - no 2 -
-
- See Radware
-
- See Cisco/Altiga
- UPS Family
- All
-
- Must be SNMP management enabled.
arpnip class duplex macsuck modules portmac topo ver vlan - Layer7::APC - - - - - - -
-
- All Family
- All
arpnip class duplex macsuck modules portmac topo ver vlan - Layer3::Arista - - - - - - -
- Aruba Wireless Controllers Family
- Uses proprietary MIBs to provide MAC to port mapping. APs appear as switch ports.
- 5000
arpnip class duplex macsuck modules portmac topo ver vlan yes Layer3::Aruba no yes - yes - - -
- 6000
arpnip class duplex macsuck modules portmac topo ver vlan yes Layer3::Aruba no yes - yes - - -
- Asante Hubs Family
- 1012
arpnip class duplex macsuck modules portmac topo ver vlan no Layer1::Asante no no - - - 1 -
- AP222x Family
- Upgrade to version 1.3 or higher.
- Sends out topology packets if enabled but does not build neighbor table.
- AP-2220, AP-2221
arpnip class duplex macsuck modules portmac topo ver vlan - Layer2::NAP222x both yes no - yes - -
- BayStack Hub Family
- Uses proprietary MIBs to provide MAC to port mapping.
- Requires Advanced or Advanced Analyzer NMM
- 102
arpnip class duplex macsuck modules portmac topo ver vlan - Layer1::Bayhub both yes yes - yes 1 -
- System 5000
arpnip class duplex macsuck modules portmac topo ver vlan - Layer1::Bayhub both yes yes - yes 1 -
- Business Ethernet Switch Family
- All
arpnip class duplex macsuck modules portmac topo ver vlan yes Layer2::Baystack write yes yes - yes - write
- Centillion Family
- Must be on version 4.x or 5.x (VLAN based) software.
- C50, C100, 5000BH, and 5005BH
arpnip class duplex macsuck modules portmac topo ver vlan - Layer2::Centillion both yes - - yes - yes
- Ethernet Routing Switch Family
- 2500, 3500, 4500, 4800, 5500, and 5600 series
arpnip class duplex macsuck modules portmac topo ver vlan yes Layer2::Baystack write yes yes - yes - write
- Ethernet Routing Switch/Passport 1600 (Software < 2.1) Family
- 1612,1624,1648
arpnip class duplex macsuck modules portmac topo ver vlan yes Layer3::N1600 both yes - yes yes - write
- Ethernet Routing Switch/Passport/Accelar LAN Family
- 8600 Code versions < 3.2 vlan based mac-suck and are unsupported. Upgrade code.
- 8600 3.2 code versions < 3.2.2.2 have Bridge MIB loop. Upgrade code.
- 8100, 8300, 8600, and 8800 series
arpnip class duplex macsuck modules portmac topo ver vlan yes Layer3::Passport write yes yes yes yes - write
- Accelar 1050,1100,1150,1200
arpnip class duplex macsuck modules portmac topo ver vlan yes Layer3::Passport write yes yes yes yes - write
- Passport 1600 series
-
- Software >= 2.1
arpnip class duplex macsuck modules portmac topo ver vlan yes Layer3::Passport write yes yes yes yes - write
- Ethernet Switch/Baystack Switch Family
- 303, 304, 350, 380, 410, 420, 425, 460, 470
arpnip class duplex macsuck modules portmac topo ver vlan - Layer2::Baystack both yes yes - yes - write
- 450
-
- Some versions > 4.X in stacked configuration have SNMP timeout issues.
- Labels full duplex as 20Mbit connection.
arpnip class duplex macsuck modules portmac topo ver vlan - Layer2::Baystack both yes yes - yes - write
- Business Policy Switch (BPS)
arpnip class duplex macsuck modules portmac topo ver vlan - Layer2::Baystack both yes yes - yes - write
- Multiprotocol Router/BayRS Family
- AN, ARN, ASN, BLN, BCN, 2430, and 5430
arpnip class duplex macsuck modules portmac topo ver vlan yes Layer3::BayRS both yes yes yes no - yes
- Secure Router Family
- 1001/1001S,1002,1004,2330,3120,4134
arpnip class duplex macsuck modules portmac topo ver vlan yes Layer3::Tasman no yes no yes no - no
- Synoptics Family
- Uses proprietary MIBs to provide MAC to port mapping.
- Requires Advanced or Advanced Analyzer NMM
- 281X
arpnip class duplex macsuck modules portmac topo ver vlan - Layer1::S3000 both yes - - yes 1 -
- System 3000
arpnip class duplex macsuck modules portmac topo ver vlan - Layer1::S3000 both yes - - yes 1 -
- Virtual Services Platform (VSP) 7000 Family
- 7024
arpnip class duplex macsuck modules portmac topo ver vlan yes Layer2::Baystack write yes yes - yes - write
- Virtual Services Platform (VSP) 9000 Family
- 9000
arpnip class duplex macsuck modules portmac topo ver vlan yes Layer3::Passport write yes yes yes yes - write
- VPN Router/Contivity Family
- All
arpnip class duplex macsuck modules portmac topo ver vlan yes Layer3::Contivity no no yes yes no - -
- Wireless Security Switches 2300 Series Family
- Uses proprietary MIBs to provide MAC to port mapping. APs appear as switch ports.
- Arpnip is emulated by gathering the MAC to IP mappings from controller snooping.
- All
arpnip class duplex macsuck modules portmac topo ver vlan yes Layer2::NWSS2300 both yes yes yes no - -
- Wireless Switch 2270 Family
- Uses proprietary MIBs to provide MAC to port mapping. APs appear as switch ports.
- Arpnip is emulated by gathering the MAC to IP mappings from controller snooping.
- 2270
arpnip class duplex macsuck modules portmac topo ver vlan yes Layer2::N2270 both yes yes yes yes - yes
-
- See Avaya
- BlueCoat SG Series Family
- All
arpnip class duplex macsuck modules portmac topo ver vlan - Layer3::Bluecoat - - - - - - -
- EdgeIron Family
- EdgeIron 24G
-
- Bug where spanning tree stuff loops forever when polled by SNMP.
arpnip class duplex macsuck modules portmac topo ver vlan yes Layer3::Foundry link yes no yes yes - yes
-
- FastIron Family
- Support very limited
- FastIron 4802
arpnip class duplex macsuck modules portmac topo ver vlan yes Layer3::Foundry link yes no yes yes 1 yes
- FastIron CX (ICX) series Family
- 6430,6450,6610
arpnip class duplex macsuck modules portmac topo ver vlan yes Layer3::Foundry link yes no yes yes - yes
- FastIron LS (FLS) series Family
- All
arpnip class duplex macsuck modules portmac topo ver vlan yes Layer3::Foundry link yes no yes yes - yes
- FastIron WorkGroup Switch (FWS) series Family
- All
arpnip class duplex macsuck modules portmac topo ver vlan yes Layer3::Foundry link yes no yes yes - yes
- ServerIron GT series Family
- All
arpnip class duplex macsuck modules portmac topo ver vlan yes Layer3::Foundry link yes no yes yes - yes
- 1000 Family
- 1003
arpnip class duplex macsuck modules portmac topo ver vlan - Layer3::Cisco no - yes - yes 1 -
- 1700 Family
- 1710
arpnip class duplex macsuck modules portmac topo ver vlan - Layer3::Cisco link - yes - yes 2 -
- 2500 Family
- 2501,2503,2511,2514
arpnip class duplex macsuck modules portmac topo ver vlan yes Layer3::Cisco no yes yes - yes 1 -
- AS2509RJ,AS2511RJ
arpnip class duplex macsuck modules portmac topo ver vlan yes Layer3::Cisco no yes yes - yes 1 -
- 2600 Family
- 2610, 2610XM, 2611, 2620, 2620XM, 2621, 2621XM, 2651XM, 2691
arpnip class duplex macsuck modules portmac topo ver vlan yes Layer3::Cisco link yes yes - yes 2 -
- 2800 Family
- 2811,2821,2851
arpnip class duplex macsuck modules portmac topo ver vlan yes Layer3::Cisco link yes yes - yes 2 -
- 3600 Family
- 3620
arpnip class duplex macsuck modules portmac topo ver vlan - Layer3::Cisco - - yes - yes 2 -
- 3640
arpnip class duplex macsuck modules portmac topo ver vlan - Layer3::Cisco no - yes - yes 2 -
- 7200 Family
- all
arpnip class duplex macsuck modules portmac topo ver vlan - Layer3::Cisco - - yes - yes 2 -
- 7500 Family
- 7507
-
- Duplex settings are falsely reported in ancient IOS versions
arpnip class duplex macsuck modules portmac topo ver vlan - Layer3::Cisco no - yes - yes 2 -
-
- Aironet Family
- IOS and Aironet OS versions
- AIRAP1100, AP1200, C1100, C1130, C1240
-
- IOS based device
arpnip class duplex macsuck modules portmac topo ver vlan - Layer2::Aironet - - yes - yes 2 -
- AP350, AP340, CAP350, CAP340, 1200, AP4800
-
- Aironet based device
arpnip class duplex macsuck modules portmac topo ver vlan - Layer3::Aironet - - yes - yes 2 -
- BR500
-
- Aironet based device
arpnip class duplex macsuck modules portmac topo ver vlan - Layer3::Aironet - - yes - yes 2 -
-
- Altiga Family
- ASA
-
- The Cisco ASA is the successor of the PIX which was bought from Altiga Networks.
arpnip class duplex macsuck modules portmac topo ver vlan - Layer3::Altiga - - yes - yes 2 -
- VPN3000
-
- The Cisco 3000 device can return duplicate interface names, while Netdisco expects unique interface names. To ensure unique device names I append numbers only when an interface name would not be unique without one. Interfaces with unique names keep their ifDescr name.
arpnip class duplex macsuck modules portmac topo ver vlan - Layer3::Altiga - - yes - yes 2 -
-
- AS5000 Family
- AS5300
arpnip class duplex macsuck modules portmac topo ver vlan - Layer3::Cisco no - yes - yes 2 -
- Catalyst 1900 Family
- Upgrade older (pre 9.0) versions of CatOS
- CatOS ver 9.00.03 through 9.00.06 have problems when trunking. Upgrade to 9.00.07 or higher.
- wsc1900c, wsc1900
arpnip class duplex macsuck modules portmac topo ver vlan - Layer2::C1900 both - yes - yes 1 write
- Catalyst 2900 Family
- IOS
- Pre IOS 11.2 (8) SA3 - PortMAC shows up in CAM table.
- 2908xl
-
- Pre IOS 11.2 (8.6) some features (duplex...) aren't present.
arpnip class duplex macsuck modules portmac topo ver vlan - Layer2::C2900 write vlan yes yes yes 2 write
- 2912MfXL, 2924CXL, 2924CXLv
arpnip class duplex macsuck modules portmac topo ver vlan - Layer2::C2900 write vlan yes yes yes 2 write
- 2924MXL
arpnip class duplex macsuck modules portmac topo ver vlan - Layer2::C2900 write vlan yes yes yes 1 write
-
- Catalyst 2940 Family
- IOS
- 2940-8TT
arpnip class duplex macsuck modules portmac topo ver vlan - Layer2::C2900 write vlan yes yes yes 2 write
- Catalyst 2950 Family
- IOS
- 2950-t24
arpnip class duplex macsuck modules portmac topo ver vlan - Layer2::C2900 write vlan yes yes yes 2 write
- Catalyst 2970 Family
- Acts just like IOS Catalyst 6500 series
- 2960, 2970G-24T-E
arpnip class duplex macsuck modules portmac topo ver vlan - Layer3::C6500 write vlan yes - yes 2 write
- Catalyst 3500 XL Family
- L2 only IOS devices - Just like Catalyst 2900 series from SNMP
- IOS Version 12.0(5)XP is buggy and doesn't do VLAN Community indexing correctly.
- 3508GXL, 3524XL, 3548XL
arpnip class duplex macsuck modules portmac topo ver vlan - Layer2::C2900 write vlan yes yes yes 2 write
- Catalyst 3550 Family
- Run IOS
- Has VLANs that don't accept SNMP connections. Don't know if they are standard (by name or number).
- Uses CISCO-STACK-MIB like Catalyst 5000 series for serial,duplex,type but not name
- Comes in flavors that support L2, L3 or combo.
- 3400 w/ MetroBase Image
arpnip class duplex macsuck modules portmac topo ver vlan - Layer3::C3550 write vlan yes - yes 2 write
- 3550, 3560, 3550-24, 3550-48
-
- L2/L3 Switch
arpnip class duplex macsuck modules portmac topo ver vlan yes Layer3::C3550 write vlan yes - yes 2 write
- 3550-12T
arpnip class duplex macsuck modules portmac topo ver vlan - Layer3::C3550 write vlan yes - yes 2 write
- Catalyst 3750 Family
- 3750
arpnip class duplex macsuck modules portmac topo ver vlan - Layer3::C6500 - - yes - yes 2 -
- Catalyst 4000 Family
- Comes in IOS and CatOS versions like the 6k series.
- Reported problems with SNMP taking up all the CPU on older SW. Requests take significantly longer.
- IOS Version 12.1.8a reported not to respond to BRIDGE-MIB calls.
- 4006
-
- Has serious slowdown/timeout problems with SNMP
- IOS Software Release 12.2(20)EW or higher required for duplex support
arpnip class duplex macsuck modules portmac topo ver vlan - Layer3::C4000 both vlan yes - yes 2 write
- 4503, 4506, 4507, 4510
-
- Has serious slowdown/timeout problems with SNMP
- IOS Software Release 12.2(20)EW or higher required for duplex support
arpnip class duplex macsuck modules portmac topo ver vlan - Layer3::C4000 both vlan yes - yes 2 write
- wsc4003, wsc4006, wsc4503, wsc4506
arpnip class duplex macsuck modules portmac topo ver vlan - Layer2::Catalyst write vlan yes - yes 2 write
- wsc4912g
-
- Dedicated 12 port gig-e switch
arpnip class duplex macsuck modules portmac topo ver vlan - Layer2::Catalyst write vlan yes - yes 2 write
-
- Catalyst 5000 Family
- wsc2926
-
- Can give false information over SNMP at times.
arpnip class duplex macsuck modules portmac topo ver vlan - Layer2::Catalyst write - yes - yes 2 write
- wsc2948g, wsc2980g, wsc5500, wsc5505, wsc5509
arpnip class duplex macsuck modules portmac topo ver vlan - Layer2::Catalyst write - yes - yes 2 write
- wsc5000
-
- Has nasty tendency to not give you all SNMP data ,flaky for some older Catalyst versions.
arpnip class duplex macsuck modules portmac topo ver vlan - Layer2::Catalyst write - yes - yes 2 write
- wsx5302
-
- Router blade that runs IOS
arpnip class duplex macsuck modules portmac topo ver vlan yes Layer3 write - yes - yes 2 write
-
- Catalyst 6500 Family
- Runs in two possible modes, native (IOS) and hybrid (IOS with CatOS on top).
- Switch running Hybrid has WS-C in description field and loves L2::Catalyst class
- Native Mode (IOS) versions seem to have SNMP problems with L2 data.
- Problem with IOS 12.2.17d-SXB ... upgrade to -SXB1 or higher.
- Sup720-3B and NativeIOS 12.2 (17d)SXB10 may report 127.0.0.51 as CDP neighbor address.
- 6503, 6509, sp72033, s3223, s32p3, s222
-
- Native mode (IOS) reports L2+L3
arpnip class duplex macsuck modules portmac topo ver vlan - Layer3::C6500 write vlan yes - yes 2 write
- 6kMsfc
-
- IOS portion of Hybrid mode. VLAN and other L3 Services.
arpnip class duplex macsuck modules portmac topo ver vlan - Layer3 no vlan yes - yes 2 no
- 6kMsfc2
-
- IOS portion of Hybrid mode. VLAN and other L3 Services.
arpnip class duplex macsuck modules portmac topo ver vlan - Layer3 no vlan yes - yes 2 no
- wsc6509
-
- Hybrid Mode (Catalyst) reports L2 only
arpnip class duplex macsuck modules portmac topo ver vlan - Layer2::Catalyst write vlan yes - yes 2 write
-
- Catalyst Blade Switch 3xxx Family
- Cisco Blade switches for Dell, FSC, HP and IBM blade system chassis. Limited testing done.
- Firewall Family
- Adaptive Security Applicance
arpnip class duplex macsuck modules portmac topo ver vlan - Layer3::Cisco - - yes - yes 2 -
- Firewall Services Modules (FWSM)
-
- Arpnip only available for 4.x software releases.
arpnip class duplex macsuck modules portmac topo ver vlan yes Layer3::CiscoFWSM - - yes - yes 2 -
- PIX Security Appliance
arpnip class duplex macsuck modules portmac topo ver vlan - Layer3::Cisco - - yes - yes 2 -
- Voice Gateway Family
- VG200
arpnip class duplex macsuck modules portmac topo ver vlan - Layer3 no - yes - yes 2 -
- Wireless Controllers Family
- Uses proprietary MIBs to provide MAC to port mapping. APs appear as switch ports.
- Arpnip is emulated by gathering the MAC to IP mappings from controller snooping.
- Device will only communicate with SNMP version configured in the controller.
- 2000, 2100, 2500, 4100, 4400, and 5500 series
arpnip class duplex macsuck modules portmac topo ver vlan yes Layer2::Airespace both yes yes yes yes 2 yes
- Netscaler Family
- All
arpnip class duplex macsuck modules portmac topo ver vlan no Layer7::Netscaler no no no yes no - no
- All Family
- All
arpnip class duplex macsuck modules portmac topo ver vlan - Layer1::Cyclades - - - - - - -
- Dell PowerConnect 3000 Series Family
- 3348, 3448P, 3424, 3424P
arpnip class duplex macsuck modules portmac topo ver vlan no Layer3::Dell both yes yes - yes - yes
- Dell PowerConnect 5000 Series Family
- 5324
arpnip class duplex macsuck modules portmac topo ver vlan no Layer3::Dell both yes yes - yes - yes
- Dell PowerConnect 6000 Series Family
- 6024F, 6224, 6248
arpnip class duplex macsuck modules portmac topo ver vlan yes Layer3::Dell both yes yes - yes - yes
- IBM BladeCenter Ethernet Switch Family
- All
arpnip class duplex macsuck modules portmac topo ver vlan no Layer3::Dell both yes yes - yes - yes
- Linksys 2048 Family
- All
arpnip class duplex macsuck modules portmac topo ver vlan no Layer3::Dell both yes yes - yes - yes
- Matrix Family
- Matrix N-Series DFE
arpnip class duplex macsuck modules portmac topo ver vlan yes Layer3::Enterasys both yes yes - yes - yes
- SuperStack C-Series Family
- C3G124-24, C3G124-48, C2G124-24, C2G124-48
arpnip class duplex macsuck modules portmac topo ver vlan yes Layer3::Enterasys both yes yes - yes - yes
- ExtremeWare based devices Family
- All
arpnip class duplex macsuck modules portmac topo ver vlan yes Layer3::Extreme both yes yes yes yes - yes
- XOS based devices Family
- All
arpnip class duplex macsuck modules portmac topo ver vlan yes Layer3::Extreme both yes yes yes yes - yes
-
- See Brocade
-
- LLDP support might be available. See note in Layer3::Pf
- Pf Family
- All
arpnip class duplex macsuck modules portmac topo ver vlan yes Layer3::Pf - - - - no - -
-
- HP Devices are very widely supported.
- HP ProCurve (old) Family
- devices in this class only have CDP support
- VLAN info in HP-VLAN MIB
- 1600M,2400,2424M,4000,8000
-
- duplex issues?
arpnip class duplex macsuck modules portmac topo ver vlan no Layer2::HP4000 link yes yes - yes 2 write
-
- HP ProCurve (recent) Family
- old firmware versions only have CDP support, more recent have LLDP
- VLAN info in Q-BRIDGE-MIB
- 2312,2324,2512,2524
arpnip class duplex macsuck modules portmac topo ver vlan no Layer2::HP both yes yes - yes 1 write
- 2510,2600,2610,2800,2810,2900,2910al
arpnip class duplex macsuck modules portmac topo ver vlan no Layer2::HP both yes yes - yes 2 write
- 3124,3324XL,3400cl,3500,3500yl
arpnip class duplex macsuck modules portmac topo ver vlan no Layer2::HP both yes yes - yes 2 write
- 4100GL,4200vl,5300XL,5400yy,5400zl
arpnip class duplex macsuck modules portmac topo ver vlan no Layer2::HP both yes yes - yes 2 write
- 6108,6200yl,6400cl,6410cl,6600,6600ml,8200zl
arpnip class duplex macsuck modules portmac topo ver vlan no Layer2::HP both yes yes - yes 2 write
- EX-series switches Family
- All
arpnip class duplex macsuck modules portmac topo ver vlan yes Layer3::Juniper link yes yes yes yes - yes
- J-series router Family
- All
arpnip class duplex macsuck modules portmac topo ver vlan yes Layer3::Juniper link yes yes yes yes - yes
- M-series router Family
- All
arpnip class duplex macsuck modules portmac topo ver vlan yes Layer3::Juniper link yes yes yes yes - yes
- NetScreen Family
- All
arpnip class duplex macsuck modules portmac topo ver vlan yes Layer3::Netscreen no yes no yes no - no
- SA-series SSL VPN appliances Family
- All
arpnip class duplex macsuck modules portmac topo ver vlan no Layer7::Neoteris no yes no yes no - no
- SRX-series router Family
- All
arpnip class duplex macsuck modules portmac topo ver vlan yes Layer3::Juniper link yes yes yes yes - yes
- Wireless LAN Controllers (Trapeze) Family
- Uses proprietary MIBs to provide MAC to port mapping. APs appear as switch ports.
- Arpnip is emulated by gathering the MAC to IP mappings from controller snooping.
- All
arpnip class duplex macsuck modules portmac topo ver vlan yes Layer2::Trapeze both yes yes yes yes - yes
- Kentrox DataSMART DSU/CSU Family
- All
arpnip class duplex macsuck modules portmac topo ver vlan - Layer2::Kentrox - - - - - - -
- Terminal Servers Family
- All
arpnip class duplex macsuck modules portmac topo ver vlan - Layer3::Lantronix - - - - - - -
- 2048 Family
- All
arpnip class duplex macsuck modules portmac topo ver vlan - Layer3::Dell - - - - - - -
- Generic L2 Device Family
- Some
arpnip class duplex macsuck modules portmac topo ver vlan - Layer2 - - - - - - -
- Generic L3 Device Family
- Some
arpnip class duplex macsuck modules portmac topo ver vlan - Layer3 - - - - - - -
- Windows Family
- Windows Router
arpnip class duplex macsuck modules portmac topo ver vlan - Layer3::Microsoft - - - - - - -
- RouterOS Family
- All
arpnip class duplex macsuck modules portmac topo ver vlan - Layer3::Mikrotik - - - - - - -
-
- See Juniper
- BSD Family
- BSD routers
arpnip class duplex macsuck modules portmac topo ver vlan - Layer3 - - - - - 2 -
- Linux Family
- net-snmp 4.x agent and 5.x agent.
- Linux routers
arpnip class duplex macsuck modules portmac topo ver vlan - Layer3 - - - - - 2 -
- Switches Family
- All
arpnip class duplex macsuck modules portmac topo ver vlan - Layer2::Netgear - - - - - - -
-
- See Juniper
-
- See Avaya
- DRG Family
- All
arpnip class duplex macsuck modules portmac topo ver vlan - Layer3::PacketFront - - - - - - -
- Orinoco Family
- AP-1000,AP-2000,AP-4000
arpnip class duplex macsuck modules portmac topo ver vlan - Layer2::Orinoco no yes - - no - -
- WavePOINT-II
arpnip class duplex macsuck modules portmac topo ver vlan - Layer2::Orinoco no yes - - no - -
- Alteon AceDirector and AceSwitch series Family
- Some versions have issues with continuous SNMP polling. Upgrade to 10.0.30.7 or higher.
- All
arpnip class duplex macsuck modules portmac topo ver vlan yes Layer3::AlteonAD both yes no yes no - yes
- Radware Alteon Application switches (AWS 2000 and 3000 series) Family
- All
arpnip class duplex macsuck modules portmac topo ver vlan yes Layer3::AlteonAD both yes no yes no - yes
- Radware Alteon switches Family
- 4408,4416,5412,5224
arpnip class duplex macsuck modules portmac topo ver vlan yes Layer3::AlteonAD both yes no yes no - yes
- Web Switch Module for IBM L2/L3 BladeCenter Family
- All
arpnip class duplex macsuck modules portmac topo ver vlan yes Layer3::AlteonAD both yes no yes no - yes
- Sun routers Family
- Sun routers
arpnip class duplex macsuck modules portmac topo ver vlan - Layer3::Sun - - - - - - -
-
- See Avaya
-
- See Juniper
-
- Doesn't report sysServices (layers)
- Zyxel DSLAM Family
- AAM10008-61, AAM1008-63
arpnip class duplex macsuck modules portmac topo ver vlan - Layer2::ZyXEL_DSLAM - - - - - - -
Color Key
[Model Attribute] [Family Attribute] [Vendor Attribute]Attribute Key
A value of - signifies the information is not specified and can not be assumed working.| Arpnip | Ability to collect ARP tables for MAC to IP translation. |
| Class | SNMP::Info Class the the device currently uses. Devices using more generic interfaces like Layer2 or Layer3 may eventually get their own subclass. |
| Duplex | Ability to cull duplex settings from device.
|
| Macsuck | Ability to get CAM tables for MAC to switch port mapping.
|
| Modules | Ability to gather hardware module information. |
| Portmac | Whether the device will list the MAC address of the switch port on each switch port when doing a Macsuck. |
| Topo | Ability to get Layer 2 Topology Information from device if the protocol is enabled. SNMP::Info supports querying Link Layer Discovery Protocol (LLDP), Cisco Discovery Protocol (CDP), SynOptics/Bay/Nortel/Avaya Network Management Protocol (SONMP), Foundry/Brocade Discovery Protocol (FDP), Extreme Discovery Protocol (EDP), and Alcatel Mapping Adjacency Protocol (AMAP). |
| Ver | SNMP Protocol Version the device has to use. |
| Vlan | Ability to get VLAN port assignments.
|
