NAME

SNMP::Info::CiscoPortSecurity - SNMP Interface to data from CISCO-PORT-SECURITY-MIB and CISCO-PAE-MIB

AUTHOR

Eric Miller

SYNOPSIS

 # Let SNMP::Info determine the correct subclass for you. 
 my $cps = new SNMP::Info(
                        AutoSpecify => 1,
                        Debug       => 1,
                        DestHost    => 'myswitch',
                        Community   => 'public',
                        Version     => 2
                        ) 
    or die "Can't connect to DestHost.\n";

 my $class      = $cps->class();
 print "SNMP::Info determined this device to fall under subclass : $class\n";

DESCRIPTION

SNMP::Info::CiscoPortSecurity is a subclass of SNMP::Info that provides an interface to the CISCO-PORT-SECURITY-MIB and CISCO-PAE-MIB. These MIBs are used across the Catalyst family under CatOS and IOS.

Use or create in a subclass of SNMP::Info. Do not use directly.

Inherited Classes

None.

GLOBALS

These are methods that return scalar values from SNMP

CISCO-PORT-SECURITY-MIB globals

$cps->cps_clear(): (cpsGlobalClearSecureMacAddresses)
$cps->cps_notify(): (cpsGlobalSNMPNotifControl)
$cps->cps_rate(): (cpsGlobalSNMPNotifRate)
$cps->cps_enable(): (cpsGlobalPortSecurityEnable)
$cps->cps_mac_count(): (cpsGlobalTotalSecureAddress)
$cps->cps_mac_max(): (cpsGlobalMaxSecureAddress)

TABLE METHODS

`CISCO-PORT-SECURITY-MIB` - Interface Config Table

$cps->cps_i_limit_val(): (cpsIfInvalidSrcRateLimitValue)
$cps->cps_i_limit(): (cpsIfInvalidSrcRateLimitEnable)
$cps->cps_i_sticky(): (cpsIfStickyEnable)
$cps->cps_i_clear_type(): (cpsIfClearSecureMacAddresses)
$cps->cps_i_shutdown(): (cpsIfShutdownTimeout)
$cps->cps_i_flood(): (cpsIfUnicastFloodingEnable)
$cps->cps_i_clear(): (cpsIfClearSecureAddresses)
$cps->cps_i_mac(): (cpsIfSecureLastMacAddress)
$cps->cps_i_count(): (cpsIfViolationCount)
$cps->cps_i_action(): (cpsIfViolationAction)
$cps->cps_i_mac_static(): (cpsIfStaticMacAddrAgingEnable)
$cps->cps_i_mac_type(): (cpsIfSecureMacAddrAgingType)
$cps->cps_i_mac_age(): (cpsIfSecureMacAddrAgingTime)
$cps->cps_i_mac_count(): (cpsIfCurrentSecureMacAddrCount)
$cps->cps_i_mac_max(): (cpsIfMaxSecureMacAddr)
$cps->cps_i_status(): (cpsIfPortSecurityStatus)
$cps->cps_i_enable(): (cpsIfPortSecurityEnable)

`CISCO-PORT-SECURITY-MIB::cpsIfVlanTable`

$cps->cps_i_v_mac_count(): (cpsIfVlanCurSecureMacAddrCount)
$cps->cps_i_v_mac_max(): (cpsIfVlanMaxSecureMacAddr)
$cps->cps_i_v(): (cpsIfVlanIndex)

`CISCO-PORT-SECURITY-MIB::cpsIfVlanSecureMacAddrTable`

$cps->cps_i_v_mac_status(): (cpsIfVlanSecureMacAddrRowStatus)
$cps->cps_i_v_mac_age(): (cpsIfVlanSecureMacAddrRemainAge)
$cps->cps_i_v_mac_type(): (cpsIfVlanSecureMacAddrType)
$cps->cps_i_v_vlan(): (cpsIfVlanSecureVlanIndex)
$cps->cps_i_v_mac(): (cpsIfVlanSecureMacAddress)

`CISCO-PORT-SECURITY-MIB::cpsSecureMacAddressTable`

$cps->cps_m_status(): (cpsSecureMacAddrRowStatus)
$cps->cps_m_age(): (cpsSecureMacAddrRemainingAge)
$cps->cps_m_type(): (cpsSecureMacAddrType)
$cps->cps_m_mac(): (cpsSecureMacAddress)

`IEEE8021-PAE-MIB::dot1xPaePortEntry`

$cps->pae_i_capabilities(): dot1xPaePortCapabilities; Indicates the PAE functionality that this Port supports and that may be managed through this MIB munged to return either 'dot1xPaePortAuthCapable' or 'dot1xPaePortSuppCapable'.
$cps->pae_i_last_eapol_frame_source(): dot1xAuthLastEapolFrameSource; The source MAC address carried in the most recently received EAPOL frame.

Data Munging Callback Subroutines

$cps->munge_pae_capabilities(): Return either 'dot1xPaePortAuthCapable' or 'dot1xPaePortSuppCapable' based upon bit value.

	NETDISCO - Network Management Tool - API Documenation	Overview Features User Guide Install Upgrade Register
		Documentation

CISCO-PORT-SECURITY-MIB - Interface Config Table

`CISCO-PORT-SECURITY-MIB` - Interface Config Table